Surge protection DLU-06D3 DLA2
Characteristics
Designed to protect, against surge voltages due to lightning, telecom lines. Based on gas-tube tecnology with fast switching diodes. When the plug-in module is pulled, the transmission signal is not interrupted.
Number of wires
4
Nominal discharge surge current (8/20)
5
Nominal load current
0.3
Response time [ta]
<1 ns
Fault indication
Kurzschluss
Temperature range
-40.0 - 85.0 °C
Degree of protection
IP20
Dimensions
Siehe Massbild
Signaling on the device
None
Nominal cross section conductor
0.4 - 1.5 mm²
Signal nominal load current
0.3
Nominal discharge current [In]
5
Discharge current max. [Imax]
20
Connector (information technology)
Clamp
Mounting method
DIN rail (top hat rail) 35 mm
With remote signalling contact
No
Test standards Germany
Homologation
UL497A
Test standards International
IEC 61643-21
![Response time [ta]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub47%2F17b59c00a5a65f78.jpg)
![Voltage protection level [Up]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub178%2F17b59c335bb80578.jpg)
![Discharge current max. [Imax]](https://image.aflury.ch/imageService/?width=60&height=60&grow=1&schema=rgb&img=sub47%2F17b59bfb79cdd178.jpg)
